Details
The glue cures in 5 seconds with LUMISENSES LED DEVICE.
A thin layer of glue ensures fast and maximum adhesion and a non-sticky result.
Eyelashes never stick together again! This fastens lash technicians work significantly.
The procedure for eyelash extensions application requires max. 2 drops of glue. The glue no longer dries on the glue base as fast as it needs LED light to cure. You no longer have to worry about the temperature and humidity in the room.
The glue has a low level of odor and vapors. It does not irritate the eyes because the glue cures immediately and the glue vapors do not activate even after taking a shower.
Additional Information
| Usage | Apply a small drop of glue to a dry glue plate. Dip 1/2 of the lash extension into the glue and connect it 0,1-0,2mm from the eyelid to the real eyelash and cure the glue according to the Lumisenses LED device parameter you are using. Attention! Avoid skin contact. In case of contact with eyes, rinse immediately with plenty of water. Keep out of reach of children, high heat, flame, direct sunlight and purposeless LED or UV light. May cause allergic reaction. For professional use. |
|---|---|
| Ingredients | Ethyl 2-cyanocrylate, Bis-Trimethylbenzoyl Phenylphosphine Oxide, Polymethyl Methacrylate |
You may also be interested in the following product(s)
-
Lumisenses LED Tweezer Device
€249.00 -
Volume tweezer curved
€7.23 -
4D LS Mink 0,07x9 mm, D-Curl
€14.81 -
Lumisenses LED Tweezer Kit
€299.00 -
Adhesive Gel Remover 10 ml
€16.53 -
4D LS Mink 0,07x8 mm, C-Curl
€14.81
Related Products
